Polyester Staple Fiber Production Line History
- An kera injinan PSF a farkon shekarun 1970.
- A tsakiyar 1990s, mun fara bincike da haɓaka layin samar da 100t / d;kuma a cikin 2002, an sanya wannan layin a cikin samarwa.
- Haɓaka duka saitin layin samarwa na 120t/d a cikin 2003.
- Daga 2005 zuwa 2011, an sanya layin samfurin 150t/d a cikin samar da tsari.
- A cikin 2012, layin samfurin 200t/d PSF ya yi nasara cikin nasara.
- Max na baya-bayan nan.Ƙarfin layi ɗaya: 225t/d.
- Fiye da layukan 200 ne ke gudana cikin nasara a duk faɗin duniya, wanda sama da 100 ke da manyan ayyuka.
- Ya zuwa yanzu, adadin fiber na aji na farko zai iya kaiwa sama da 98% kuma na fiber mai daraja ya wuce 95%.
Tsari kwarara na polyester kadi layin daga kwalabe ko guntu
Gilashin kwalban Polyester ko kwakwalwan kwamfuta - Mai zafi da busassun-hopper-Screw extruder -Narke tacewa - Kaya katako - Fakitin famfo mai jujjuyawa - Tsarin Quenching-Tunnel mai jujjuya - Injin ɗaukar kaya - Capstan - Injin traverse (gwangwani fiber)
Tsari Gudawar Layin Jiyya na Polyester(Hanyar aiwatar da Toyota)
Creel - Module Prefeed (5 rollers + 1 immersion roller) - Bath Bath - Immersion Roller - Draw Stand 1 (5 rollers + 1 immersion roller) - Zana wanka - Zana Tsaya 2 (5 rollers + 1 immersion roller) - Akwatin dumama tururi - Zana Tsaya 3 (12 rollers) - Annealer (5 rollers) - Stacker Oiling - (Trio - Tension Roller) - Pre-crimper Heating Box - Crimper - Conveyor Cooling (ko Tow Plaiter - Dryer) - Man Fetur - Tsaya Tsaya - Cutter - Baler
Tsari Gudawar Layin Polyester Bayan Jiyya (Hanyar aiwatar da Fleissner)
Creel - Module Prefeed (7 rollers) - Baho na nutsewa - Zana Tsaya 1 ( 7 rollers ) - Zana wanka - Zana Tsaya 2 (7 rollers) - Akwatin dumama tururi - Annealer ( rollers jacket 18) - Mai sanyaya Fashe - Zana Tsaya 3 (7) rollers) – Tow Stacker – Trio – Tension Roller – Pre-crimper Heating Box – Crimper – Tow Plaiter – Dryer – Tension Stacker – Cutter – Baler
Fiber Index (don Magana)
| A'a. | Abubuwa | Fiber mai ƙarfi | Tsakar fiber | Nau'in Wool | |||||||||||||
| High-Tenacity | Na al'ada | ||||||||||||||||
| Mafi kyau | Darasi A | Cancanta | Mafi kyau | Darasi A | Cancanta | Mafi kyau | Darasi A | Cancanta | Mafi kyau | Darasi A | Cancanta | ||||||
| 8 | Adadin crimp / (pc/25mm) | M2± 2.5 | M2±3.5 | M2± 2.5 | M2±3.5 | M2± 2.5 | M2±3.5 | M2± 2.5 | M2±3.5 | ||||||||
| 9 | Rabon Crimp/% | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | ||||||||
| 10 | Juya a 180 ℃ | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | ||||||||
| 11 | Takamaiman juriya /Ω*cm ≤ | M5×108 | M5×109 | M5×108 | M5×109 | M5×108 | M5×109 | M5×108 | M5×109 | ||||||||
| 12 | 10% tsawo / (CN/dtex) ≥ | 2.8 | 2.4 | 2 | -- | -- | -- | -- | -- | -- | -- | -- | -- | ||||
| 13 | Bambancin ƙarfin karya /≤ | 10 | 15 | 10 | -- | -- | 13 | -- | -- | -- | -- | -- | |||||
Lokacin aikawa: Satumba-05-2022